Aerosol Cutting Fluid
Improve tool life with ValCOOL's Aerosol Cutting and Tapping Fluid. With a high affinity for metal, this fluid will create a thin coat on protection on 100% of your tool. Reduce the mess of liquid tapping fluids while improving performance.
Contact Us Today:
1 (800) 244-9004
Features & Benefits
Characteristics
- Excellent cooling and lubricating properties
- Foaming action penetrates into the cut to extend tap life and promote superior finish
Benefits
- Clings to the tool
- Provides superior finish
- Does not contain chlorinated solvents
Properties
| Appearance | Amber Spray |
| Form | Liquid |
| Vapor Density | Heavier than air |
| Evaporation Rate | Slower than ether |
| Odor | Petroleum |
| Flammability | Level 1 Aerosol |
| Can Size | 20 oz. |
| Net Weight | 16 oz. |
Questions About Our Products?
Contact Our Sales Engineers.
Our Sales Engineers are widely regarded as the most competent and responsive in the business: they know the material, the workpiece, the tools and the fluids that you need to make it right. Together with our Field Application Engineers, they’re available with on-site assistance and technical support when you need it.
Contact Us Today:
1 (800) 244-9004
Additional Details
Application
- Boring
- Milling
- Sawing
- Drilling
- Tapping
- Grinding
- Reaming
- Thread Cutting
Directions For Use
For use on all types of both ferrous and non-ferrous metals
Shake can vigorously before use. Clean surface thoroughly.
Keep can 6 to 8 inches away from surface and apply evenly at
the point of cut. Thin coats are preferable. Reapply if needed.
Health & Safety
See the most recent SDS which is available directly from ValCOOL, your local representative or authorized distributor. ValCOOL uses only raw materials not listed as carcinogenic by IRAC.
Similar ValCOOL® Products
Ready to Get Started?
Talk to Our Hands-On Experts
Give us a call or fill out the form below and we’ll be in touch as soon as possible. *marks required fields