Dry Lubricant Containing Moly
Moly Lube is an aerosol dry moly lube that is found in thousands of shops around the world. The product is used to provide a highly lubricious coating to reduce friction between two surfaces. Val-Sol Dry Moly Lubricant dries almost instantly upon application and due to the sub-micron nature of the moly particle size adheres to almost any surface.
Common uses for Val-Sol Dry Moly Lube include lock mechanisms, chains, conveyors, ovens, and pistons. Additionally, this product is also found providing lubrication for gears, drives, sliding doors, wire rope, threaded parts, and hinges.
Not all moly lubricants are created equal. The conveniently packaged Val-Sol Dry Moly Lube assures excellent surface coverage and a clean working environment. Contact ValCOOL for more information.
Contact Us Today:
1 (800) 244-9004
Features & Benefits
Characteristics
- Non-Corrosive
- Greatly enhances operating efficiency
- Requires little or no surface preparation
- Quick drying film
Benefits
- Resists high temperatures (-28⁰F-600⁰F / 33⁰C-315⁰C)
- Adheres to most substrates
- Repels dust and dirt
Properties
| Appearance | Grey Spray |
| Form | Liquid |
| Vapor Density | Heavier than air |
| Evaporation Rate | Slower than ether |
| Odor | Solvent |
| Flammability | Level 3 Aerosol |
| Can Size | 16 oz. |
| Net Weight | 12 oz. |
Questions About Our Products?
Contact Our Sales Engineers.
Our Sales Engineers are widely regarded as the most competent and responsive in the business: they know the material, the workpiece, the tools and the fluids that you need to make it right. Together with our Field Application Engineers, they’re available with on-site assistance and technical support when you need it.
Contact Us Today:
1 (800) 244-9004
Additional Details
Applications
- Lock Mechanisms
- Ovens
- Cables
- Chains
- Pistons
- Sprockets
- Conveyors
- Wire Ropes
- Sliding Doors
- Tumbler Locks
- Tracks
- Hinges
- Gaskets
- Windows
- Gears
- Pump Assemblies
- Threaded Parts
- Drives
- Exposed Metal Parts
- Pipe
- Equipment
Directions For Use
Made for areas servicing high temperatures (-28⁰F/33⁰C600⁰F/315⁰C)
Shake can vigorously before use. Clean surface thoroughly.
Keep can 6 to 8 inches away from surface and apply evenly.
Thin coats are preferable. Set 1 to 5 minutes for best drying.
The solids in this product may clog nozzle. Shake often while
using.
Health & Safety
See the most recent SDS which is available directly from
ValCOOL, your local representative or authorized distributor.
ValCOOL uses only raw materials not listed as carcinogenic by
IRAC.
Similar ValCOOL® Products
Ready to Get Started?
Talk to Our Hands-On Experts
Give us a call or fill out the form below and we’ll be in touch as soon as possible. *marks required fields