Your browser is out of date.

You are currently using Internet Explorer 7/8/9, which is not supported by our site. For the best experience, please use one of the latest browsers.

Cutting Oil Line Card

Val-Swiss Cutting Oils

ValCOOL has designed a line of products for precision machining, specifically Swiss machining.  These products all have low viscosities, excellent tooling protection, and low surface tension for full coverage.   Realizing not every application requires 100% synthetic technology, ValCOOL's line of Val-Swiss cutting oils has three levels of technology for operations requiring moderate, aggressive, and severe machining lubrication performance.

For the unique challenges of Swiss machining, ValCOOL manufactures a line of oils to cover the entire market. With Val-Swiss, a product for your application exists: from our ultra pure 100% ester chemistries, our value driven oil blends, to our hydrotreated petroleum technologies. Products are available in ISO 10 or ISO 22 viscosities. All Val Swiss products contain our proprietary Zyretol additive package to assure lubricity and tool protection are at a premium.

Request a quote Flyer

Val-Swiss 10

Synthetic ester based cutting oil for heavy duty applications

Characteristics

  • Chlorine-free
  • Low misting properties
  • High flash point
  • Made from renewable resources

Benefits

  • High flash point is safer alternative to mineral oil based fluids
  • Suitable for virtually all materials and tools
  • Low viscosity optimizes chip removal rates

Material

  • Aluminum Machining
  • Cast Iron Machining
  • Nickel / Chrome Alloys
  • Stainless
  • Copper Yellow Metals

Machining Operation

  • Milling
  • Drilling
  • Tapping
  • Manual Threading
  • Grinding
  • Deep Hole Drilling

Machine Tool Configuration

  • High Pressure
  • Open Gantry
  • Non-Vented Machines
  • Machine Tables Walked On
  • Central Systems
  • Underground Sumps

ValCOOL recommends using Val-U-Clean or K-5-P cleaner before adding Val-Swiss 10 to a machine. Val-Swiss 10 is a straight cutting oil so mixing with water is not required. Maintaining the Val-Swiss 10 at its optimum performance is achieved through good fluid filtration practices. No special precautions are necessary with respect to seals or valves.

Fluid compatibility and machinability should always be tested first; as fluid concentration, metal alloy, and machining operation are variable. 

5 gal. pail

5 gal. pail

55 gal. drum

55 gal. drum

275 gal. tote

275 gal. tote

Specifications

ClassificationCutting Oil
Recommended ConcentrationNo mixing Required
Refractive Index RangeN/A
Refractive Index Multiplier FactorsN/A
Available ColorAmber
FragranceMild odor

Properties

AppearanceClear Yellow Liquid
Diluted AppearanceN/A
Solubility in WaterDoes not mix
OdorMild Industrial
Specific Gravity 0.87
Sulfur Content (%)1.6
Flash Point (°F)>390°F
ISO Viscosity @ 40°C10

Metal Compatibility

  • Alloys made of steel
  • Titanium alloys
  • Hi Temp Alloys
  • Aluminum alloys
  • Aluminum
  • Tungsten Carbon
  • Stainless Steel
  • Copper alloys
  • Cast Iron
  • Titanium
  • Tool Steel
  • Nickel alloys

Health & Safety

See the most recent SDS which is available directly from ValCOOL, your local representative or authorized distributor. ValCOOL uses only raw materials not listed as carcinogenic by IRAC.

Val-Swiss 22

Synthetic ester based cutting oil for heavy duty applications

Characteristics

  • Chlorine, phenol and boron free
  • Low misting properties
  • High flash point
  • Made from renewable resources
  • Extended tool life with increased production rates
  • Exceptional lubrication properties

Benefits

  • High flash point is safer alternative to mineral oil based fluids
  • Suitable for virtually all materials and tools
  • Low viscosity optimizes chip removal rates
  • Outstanding surface finish
  • Non-irritating to operators’ skin

Material

  • Aluminum Machining
  • Cast Iron Machining
  • Nickel / Chrome Alloys
  • Stainless
  • Copper Yellow Metals

Machining Operation

  • High Pressure
  • Open Gantry
  • Non-Vented Machines
  • Machine Tables Walked On
  • Central Systems
  • Underground Sumps

Machine Tool Configuration

  • Milling
  • Drilling
  • Tapping
  • Manual Threading
  • Grinding
  • Deep Hole Drilling

ValCOOL recommends using Val-U-Clean or K-5-P cleaner before adding Val-Swiss 22 to a machine. Val-Swiss 22 is a straight cutting oil so mixing with water is not required. Maintaining the Val-Swiss 22 at its optimum performance is achieved through good fluid filtration practices. No special precautions are necessary with respect to seals or valves.

Fluid compatibility and machinability should always be tested first; as fluid concentration, metal alloy, and machining operation are variable. 

5 gal. pail

5 gal. pail

55 gal. drum

55 gal. drum

275 gal. tote

275 gal. tote

Specifications

ClassificationCutting Oil
Recommended ConcentrationNo mixing Required
Refractive Index RangeN/A
Refractive Index Multiplier FactorsN/A
Available ColorAmber
FragranceMild odor

Properties

Appearance:Clear Yellow Liquid
Diluted AppearanceN/A
Solubility in WaterDoes not mix
Odor: Mild Industrial
Specific Gravity0.89
Sulfur Content (%)1.6
Flash Point (°F)>390°F
ISO Viscosity @ 40°C22

Metal Compatibility

  • Alloys made of steel
  • Titanium alloys
  • Hi Temp Alloys
  • Aluminum alloys
  • Aluminum
  • Tungsten Carbon
  • Stainless Steel
  • Copper alloys
  • Cast Iron
  • Titanium
  • Tool Steel
  • Nickel alloys

Health & Safety

See the most recent SDS which is available directly from ValCOOL, your local representative or authorized distributor. ValCOOL uses only raw materials not listed as carcinogenic by IRAC.

Val-Swiss 1050

Synthetic ester containing cutting oil designed for medium duty applications

Characteristics

  • High flash point is safer alternative to mineral oil based fluids
  • Made from renewable resources
  • Chlorine, phenol and boron free
  • Low misting properties
  • Suitable for virtually all materials and tools

Benefits

  • Extended tool life with increased production rates
  • Excellent chip removal rates
  • Exceptional lubrication properties
  • Outstanding surface finish
  • Non-irritating to operators’ skin
  • Low viscosity optimizes chip removal rates

Material

  • Aluminum Machining
  • Cast Iron Machining
  • Nickel / Chrome Alloys
  • Stainless
  • Copper Yellow Metals

Machining Operation

  • High Pressure
  • Open Gantry
  • Non-Vented Machines
  • Machine Tables Walked On
  • Central Systems
  • Underground Sumps

Machine Tool Configuration

  • Milling
  • Drilling
  • Tapping
  • Manual Threading
  • Grinding
  • Deep Hole Drilling

ValCOOL recommends using Val-U-Clean or K-5-P cleaner before adding Val-Swiss 1050 to a machine. Val-Swiss 1050 is a straight cutting oil so mixing with water is not required. Maintaining the Val-Swiss 1050 at its optimum performance is achieved through good fluid filtration practices. No special precautions are necessary with respect to seals or valves. Fluid compatibility and machinability should always be tested first; as fluid concentration, metal alloy, and machining operation are variable. 

Fluid compatibility and machinability should always be tested first; as fluid concentration, metal alloy, and machining operation are variable.

5 gal. pail

5 gal. pail

55 gal. drum

55 gal. drum

275 gal. tote

275 gal. tote

Specifications

ClassificationCutting Oil
Recommended ConcentrationNo mixing Required
Refractive Index RangeN/A
Refractive Index Multiplier FactorsN/A
Available ColorAmber
FragranceMild odor

Properties

AppearanceClear Yellow Liquid
Diluted AppearanceN/A
Solubility in WaterDoes not mix
OdorMild Industrial
Specific Gravity 0.86
Sulfur Content (%)1.6
Flash Point (°F)>390°F
ISO Viscosity @ 40°C10

Metal Compatibility

  • Alloys made of steel
  • Titanium alloys
  • Hi Temp Alloys
  • Aluminum alloys
  • Aluminum
  • Tungsten Carbon
  • Stainless Steel
  • Copper alloys
  • Cast Iron
  • Titanium
  • Tool Steel
  • Nickel alloys

Health & Safety

See the most recent SDS which is available directly from ValCOOL, your local representative or authorized distributor. ValCOOL uses only raw materials not listed as carcinogenic by IRAC.

Val-Swiss 2250

Synthetic ester containing cutting oil designed for medium duty applications

Characteristics

  • Chlorine, phenol and boron free
  • Low misting properties
  • High flash point
  • Made from renewable resources
  • Outstanding surface finish
  • Non-irritating to operators’ skin

Benefits

  • High flash point is safer alternative to mineral oil based fluids
  • Suitable for virtually all materials and tools
  • Low viscosity optimizes chip removal rates
  • Extended tool life with increased production rates
  • Excellent chip removal rates
  • Exceptional lubrication properties

Material

  • Aluminum Machining
  • Cast Iron Machining
  • Nickel / Chrome Alloys
  • Stainless
  • Copper Yellow Metals

Machining Operation

  • High Pressure
  • Open Gantry
  • Non-Vented Machines
  • Machine Tables Walked On
  • Central Systems
  • Underground Sumps

Machine Tool Configuration

  • Milling
  • Drilling
  • Tapping
  • Manual Threading
  • Grinding
  • Deep Hole Drilling

ValCOOL recommends using Val-U-Clean or K-5-P cleaner before adding Val-Swiss 2250 to a machine. Val-Swiss 2250 is a straight cutting oil so mixing with water is not required. Maintaining the Val-Swiss 2250 at its optimum performance is achieved through good fluid filtration practices. No special precautions are necessary with respect to seals or valves.

Fluid compatibility and machinability should always be tested first; as fluid concentration, metal alloy, and machining operation are variable. 

5 gal. pail

5 gal. pail

55 gal. drum

55 gal. drum

275 gal. tote

275 gal. tote

Specifications

ClassificationCutting Oil
Recommended ConcentrationNo mixing Required
Refractive Index RangeN/A
Refractive Index Multiplier FactorsN/A
Available ColorAmber
FragranceMild odor

Properties

AppearanceClear Yellow Liquid
Diluted AppearanceN/A
Solubility in WaterDoes not mix
OdorMild Industrial
Specific Gravity0.86
Sulfur Content (%)1.6
Flash Point (°F)>390°F
ISO Viscosity @ 40°C22

Metal Compatibility

  • Alloys made of steel
  • Titanium alloys
  • Hi Temp Alloys
  • Aluminum alloys
  • Aluminum
  • Tungsten Carbon
  • Stainless Steel
  • Copper alloys
  • Cast Iron
  • Titanium
  • Tool Steel
  • Nickel alloys

Health & Safety

See the most recent SDS which is available directly from ValCOOL, your local representative or authorized distributor. ValCOOL uses only raw materials not listed as carcinogenic by IRAC

 Val-Swiss 2290

Synthetic ester containing cutting oil designed for light duty applications

Characteristics

  • Chlorine, phenol and boron free
  • Low misting properties
  • High flash point
  • Made from renewable resources
  • Outstanding surface finish
  • Non-irritating to operators’ skin

Benefits

  • High flash point is safer alternative to mineral oil based fluids
  • Suitable for virtually all materials and tools
  • Low viscosity optimizes chip removal rates
  • Extended tool life with increased production rates
  • Excellent chip removal rates
  • Exceptional lubrication properties

Material

  • Aluminum Machining
  • Cast Iron Machining
  • Nickel / Chrome Alloys
  • Stainless
  • Copper Yellow Metals

Machining Operation

  • High Pressure
  • Open Gantry
  • Non-Vented Machines
  • Machine Tables Walked On
  • Central Systems
  • Underground Sumps

Machine Tool Configuration

  • Milling
  • Drilling
  • Tapping
  • Manual Threading
  • Grinding
  • Deep Hole Drilling

ValCOOL recommends using Val-U-Clean or K-5-P cleaner before adding Val-Swiss 2290 to a machine. Val-Swiss 2290 is a straight cutting oil so mixing with water is not required. Maintaining the Val-Swiss 2290 at its optimum performance is achieved through good fluid filtration practices. No special precautions are necessary with respect to seals or valves.

Fluid compatibility and machinability should always be tested first; as fluid concentration, metal alloy, and machining operation are variable. 

5 gal. pail

5 gal. pail

55 gal. drum

55 gal. drum

275 gal. tote

275 gal. tote

Specifications

ClassificationCutting Oil
Recommended ConcentrationNo mixing Required
Refractive Index RangeN/A
Refractive Index Multiplier FactorsN/A
Available ColorAmber
FragranceMild odor

Properties

AppearanceClear Yellow Liquid
Diluted AppearanceN/A
Solubility in WaterDoes not mix
OdorMild Industrial
Specific Gravity0.87
Sulfur Content (%)1.2
Flash Point (°F)>390°F
ISO Viscosity @ 40°C22

Metal Compatibility

  • Alloys made of steel
  • Titanium alloys
  • Hi Temp Alloys
  • Aluminum alloys
  • Aluminum
  • Tungsten Carbon
  • Stainless Steel
  • Copper alloys
  • Cast Iron
  • Titanium
  • Tool Steel
  • Nickel alloys

Health & Safety

See the most recent SDS which is available directly from ValCOOL, your local representative or authorized distributor. ValCOOL uses only raw materials not listed as carcinogenic by IRAC.

Questions About Our Products?
Contact Our Sales Engineers.

Our Sales Engineers are widely regarded as the most competent and responsive in the business: they know the material, the workpiece, the tools and the fluids that you need to make it right. Together with our Field Application Engineers, they’re available with on-site assistance and technical support when you need it.

Ready to Get Started?
Talk to Our Hands-On Experts

Give us a call or fill out the form below and we’ll be in touch as soon as possible. *marks required fields

Contact Us Today:

1 (800) 244-9004