Cutting Oils & Fluids
Dark Cutting Oil For Severe Applications
VP Dark Thread Cutting Oil is used in a host of various machines manufacturing the following:
- Threaded pipe and bars
- Couplings
- Parts containing significant tapped holes
- Gear cutting and hobbing
PV Dark Thread Cutting Oil contains active sulfur so the product is not recommend to be used when machining yellow metals or yellow metal containing alloys. Dark thread cutting oils and fluids are often viewed as a commodity yet a performance driven product like VP Dark Thread Cutting Oil can provide substantially better results.
Contact Us Today:
1 (800) 244-9004
Features & Benefits
Characteristics
- Chlorine, phenol and boron free
- Low misting properties
Benefits
- Extended tool life with increased production rates
- Excellent chip removal rates
- Exceptional lubrication properties
- Outstanding surface finish
- Non-irritating to operators’ skin
Properties
| Appearance | Dark Liquid |
| Diluted Appearance | N/A |
| Solubility in Water | Does not mix |
| Odor | Mild Industrial |
| Specific Gravity | 0.90 |
| Total Sulfur (%) | 1.5 |
| Active Sulfur (%) | 1.0 |
| Total Ester (%) | 5.0 |
| Total Chlorine (%) | 0.0 |
| Flash Point (°F) | >390°F |
| ISO Viscosity @ 40°C | 22 |
Questions About Our Products?
Contact Our Sales Engineers.
Our Sales Engineers are widely regarded as the most competent and responsive in the business: they know the material, the workpiece, the tools and the fluids that you need to make it right. Together with our Field Application Engineers, they’re available with on-site assistance and technical support when you need it.
Contact Us Today:
1 (800) 244-9004
Applications & Usage
ValCOOL recommends using Val-U-Clean or K-5-P to thoroughly clean machine prior to adding Val-Cut Dark Cutting Oil. Be sure to completely remove all cleaner solution to avoid contamination.
Val-Cut Dark Cutting Oil is a straight cutting oil so mixing with water is not required.
Maintaining the Val-Cut Dark Cutting Oil at its optimum performance is achieved through good fluid filtration practices.
No special precautions are necessary with respect to seals or valves.
* Fluid compatibility and machinability should always be tested first; as fluid concentration, metal alloy, and machining operation are variable.
Additional Details
Metal Compatibality
- Steel alloys
- Titanium alloys
- Hi Temp Alloys
- Iron
- Iron alloys
- Tungsten Carbon
- Stainless Steel
- Duplex
- Cast Iron
- Titanium
- Tool Steel
- Steel
Health & Safety
See the most recent SDS which is available directly from ValCOOL, your local representative or authorized distributor. ValCOOL uses only raw materials not listed as carcinogenic by IRAC.
Similar ValCOOL® Products
Ready to Get Started?
Talk to Our Hands-On Experts
Give us a call or fill out the form below and we’ll be in touch as soon as possible. *marks required fields