Oils & Lubricants for Gun Drilling
Whether you are deep hole drilling oil ports, boring seamless pipe, or gun drilling countless holes in die sets, VP Gun Drilling Oil is your gun drilling oil of choice. The product works equally well boring 3" diameter holes as it does 60x small diameter (0.25") holes. Customers have saved significant money when using our metalworking lubricants for gun drilling as the life of their gun drills has significantly increased when compared to other fluids used in the market.
Contact Us Today:
1 (800) 244-9004
Features & Benefits
Characteristics
- Chlorine, phenol and boron free
- Low misting properties
Benefits
- Extended tool life with increased production rates
- Excellent chip removal rates
- Exceptional lubrication properties
- Outstanding surface finish
- Non-irritating to operators’ skin
Properties
| Appearance | Clear Dark Liquid |
| Diluted Appearance | N/A |
| Solubility in Water | Does not mix |
| Odor | Mild Industrial |
| Specific Gravity | 0.87 |
| Total Sulfur (%) | 2.5 |
| Active Sulfur (%) | 1.0 |
| Total Ester (%) | 5.0 |
| Total Chlorine (%) | 0.0 |
| Flash Point (°F) | >390°F |
| ISO Viscosity @ 40°C | 22 |
Questions About Our Products?
Contact Our Sales Engineers.
Our Sales Engineers are widely regarded as the most competent and responsive in the business: they know the material, the workpiece, the tools and the fluids that you need to make it right. Together with our Field Application Engineers, they’re available with on-site assistance and technical support when you need it.
Contact Us Today:
1 (800) 244-9004
Applications & Usage
ValCOOL recommends using Val-U-Clean or K-5-P to thoroughly clean machine prior to adding Val-Cut Gun Drill.
Be sure to completely remove all cleaner solution to avoid contamination. Val-Cut Gun Drill is a straight cutting oil so mixing with water is not required.
Maintaining the Val-Cut Gun Drill at its optimum performance is achieved through good fluid filtration practices.
No special precautions are necessary with respect to seals or valves.
* Fluid compatibility and machinability should always be tested first; as fluid concentration, metal alloy, and machining operation are variable.
Additional Details
Metal Compatibality
- Alloys made of steel
- Titanium alloys
- Hi Temp Alloys
- Aluminum alloys
- Aluminum
- Tungsten Carbon
- Stainless Steel
- Copper alloys
- Cast Iron
- Titanium
- Tool Steel
- Nickel alloys
Health & Safety
See the most recent SDS which is available directly from ValCOOL, your local representative or authorized distributor. ValCOOL uses only raw materials not listed as carcinogenic by IRAC.
Similar ValCOOL® Products
Ready to Get Started?
Talk to Our Hands-On Experts
Give us a call or fill out the form below and we’ll be in touch as soon as possible. *marks required fields